Forum Thread

Oahu Island Topics

(Oahu Island Specific)

0 messages

Updated

Off-Topic

Lakes Online Forum

84,028 messages

Updated 10/12/2024 10:31:21 AM

Boat Maintenance

Lakes Online Forum

5,204 messages

Updated 9/14/2024 10:10:50 AM

Oahu Island Fishing

(Oahu Island Specific)

0 messages

Updated

Jokes

Lakes Online Forum

4,172 messages

Updated 9/9/2024 5:04:44 PM

Sports

Lakes Online Forum

4,261 messages

Updated 5/28/2024 6:31:10 AM

Grilling & Recipes

Lakes Online Forum

2,979 messages

Updated 6/26/2024 5:03:03 AM

Tallapoosa River Topics

Lakes Online Forum

98 messages

Updated 4/15/2024 1:00:58 AM

Forum Usage Rules

Name:	LonghornBoater -	Reply
Subject:	Ski Locker Hatch
Date:	4/10/2012 5:08:27 PM

My 2002 Larson has the typical drop-in hatch amid ship covering the ski storage locker. This hatch has become soft and I suspect has begun to rot out. Larson informs me that a replacement hatch is not offered as the boat is too old.

Do any of you know of someone who might be able to fabricate a replacement hatch?

How difficult would it be to do myself?

Name:	wix -	Reply
Subject:	Ski Locker Hatch
Date:	4/10/2012 6:05:57 PM

It's probably just a piece of 3/4 plywood with carpet on top and an aluminum angle formed around the edge. Go get a piece of treated plywood and a strip of carpet to match what you have, some glue, a jig saw, and fix it yourself. Cost about $50 total and you'll have a bunch of plywood left over for your next project.

Name:	GoneFishin -	Reply
Subject:	Ski Locker Hatch
Date:	4/10/2012 6:12:50 PM

If you want the best contact Spookeay Marine (256) 404-1330. Speak to Heather who owns and does the work.she is a true craftswoman.

Name:	mariah1 -	Reply
Subject:	Ski Locker Hatch
Date:	4/10/2012 8:57:14 PM

You can't go wrong with Heather.

Name:	CAT BOAT -	Reply
Subject:	Ski Locker Hatch
Date:	4/11/2012 9:43:13 AM

But, Heather may leave an egg in your boat. And Dean will surely find it. (Kiddin' around of course). I am with WIX on this one. What are the deminsions of the hatch?

Name:	LonghornBoater -	Reply
Subject:	Ski Locker Hatch
Date:	4/11/2012 11:38:36 AM

Thanks for all your responses. I am going to take a shot at fixing it myself (now where did I put that chainsaw?).

Seriously, I will take the hatch out next week and determine how the aluminum trim is attached. Surely it will serve as an acceptable template for cutting the replacement piece. Heck, I might even get lucky and be able to re-use the carpet.

Again thanks for the help.

Name:	houseboat -	Reply
Subject:	Ski Locker Hatch
Date:	4/12/2012 1:23:21 PM

I would suggest using marine plywood and at least fiberglass the top surface and saturate the entire piece with resin prior to fiberglassing the top. Regular treated plywood at your local shop is very poor quality.
If your boat has a rotten hatch cover it probably has a lot of other rotten areas as well. Take a hammer and tap the sid e of the stringers inside the hatch. It should sound very solid.
Houseboat